ZIPWAKE PRO
Call 954-577-2850 or Send Enquiry for Pricing
Product Description
Zipwake PRO’s interceptors operate five times faster than previous models, delivering a whole new level of performance and precision. Moving from 0 to 30 or 60 mm in just 0.3 seconds, the increased blade speed enables ultra-fast adjustments to changing conditions. Whether you’re facing wind, waves, or shifting loads, Zipwake PRO responds instantly — optimizing trim and stability for smoother, safer, and more accurate control when it matters most.
PERFECT PITCH ACTIVE PITCH CONTROL
With Active Pitch, Zipwake PRO continuously and rapidly adjusts the boat’s trim to maintain the running angle set by the user. Regardless of head seas, following seas, beam seas, or changes in weight distribution, the system constantly works to keep the boat’s running trim angle. This automatic adjustment ensures improved acceleration, better visibility, enhanced stability, greater comfort and lower fuel consumption.
ACTIVE ROLL CONTROL STABILITY IN ALL CONDITIONS
The ultra-fast interceptors ensure quicker, more precise corrections to rolling motions caused by changing conditions. PRO responds instantly, delivering smoother, safer handling, keeping your boat steady and your passengers comfortable.
Balanced turn Turns that turn heads
Balanced turn is faster and more precise with Zipwake PRO. The system dynamically adjusts the heeling angle to cancel out the lateral forces experienced onboard during turns, resulting in more controlled manouvering and smooth, comfortable turns at any speed.
Serious lift power Real trim control
A trim control system is only as effective as the lift force it can generate. Zipwake PRO delivers serious lift power thanks to a substantial blade stroke — 30 mm in Series S PRO and 60 mm in Series E PRO.
Everything included
ACTIVE PITCH CONTROL
Active pitch control automatically keeps the boat at the desired running angle for better performance, comfort, stability, and fuel efficiency in all conditions.
ACTIVE ROLL CONTROL
Active roll control dynamically and automatically keeps your boat on an even keel — regardless of wind, load distribution or rough waves.
BALANCED TURN
Perfectly balanced turns — every time. Whatever your speed, Zipwake automatically adjusts the heeling angle of your boat for a safer and more comfortable ride.
What Sets Zipwake PRO Apart
Not all trim systems work the same way. This page highlights the practical differences that matter on the water—comfort, visibility, stability, and control.
INTERFACE
Our new interface has been refined and polished to deliver a smoother, more intuitive user experience. Designed with the operator in mind, it ensures the right information is presented at the right time — clearly and efficiently.
WAKE SHAPING
Zipwake PRO allows using the interceptors as tool for shaping the wake to creating the ideal wake-surfing conditions.
SERIES S PRO FOR BOATS UP TO 50 FT
Compact and slim, with a blade stroke of 30 mm. Ideal for boats up to 50 feet, especially where transom space is limited. Includes 13 fast-acting interceptors (four straight, four V-shaped, four chine and one intermediate).
SERIES E PRO FOR BOATS UP TO 100 FT
Larger and more robust, with a 60 mm blade stroke. Designed for bigger boats up to 100 feet – or smaller, heavier boats that need extra lift. Includes 12 larger, fast-acting interceptors (four straight, three tunnel, one round and four chine).
CONTROL PANEL PRO
Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the helmsman to focus on the right thing – enjoying the boat ride!
Take full command with the Zipwake Control Panel PRO. The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of uncomfortable and dangerous boat pitch and roll.
Push the AUTO BUTTON – and GO!
The system provides continuous feedback of boat speed, turning radius, pitch and roll angle, as well as the interceptors’ positions, on a 2.8″ sunlight-readable wide viewing color display.
The panel’s waterproof design withstands harsh marine conditions in open boats or on a flybridge. The sockets for connecting peripherals are located on the rear of the panel. In addition to connectors for the system’s distribution unit and multiple control panels, external GPS and NMEA 2000 equipment can be connected. The system can also be connected to the ignition key for automatic system power-on. A waterproof cap conceals the USB interface that allows for future software upgrades and ensures that the Zipwake Dynamic Trim Control System is future-proof.
NEW INTERFACE
Our new interface has been refined and polished to deliver a smoother, more intuitive user experience. Designed with the operator in mind, it ensures the right information is presented at the right time — clearly and efficiently.
- Fully automatic – Dynamic pitch and roll control – Steering and turn enhancement
- Built-in GPS and motion sensors
- Unique and intuitive 3D controls
- Sunlight readable color display
- Instant state user feedback
- Auto power on/off via ignition key sense
- Full range of electrical interfaces
- Waterproof
- Auto dimming / night mode
- Upgradable via USB stick
- Supports up to 3 additional Control Panels in the system
- Surface, flush or gimbal bracket mount
- Manages installation configurations from 1 to 6 Series E dual-servo interceptors or any mix with single-servo interceptors
- Allows configuration of interceptor pair function
- Auto Cleaning – Selectable periodic cleaning cycle – Prevents fouling inside the interceptor
- Monitored and/or controlled from external devices, e.g. multifunction displays or plotters via its NMEA 2000 interface
INTERFACES
- I-BUS IN (CAN bus)
- I-BUS OUT (CAN bus)
- NMEA 2000
- Key sense
- USB Device Port (Type A)
- USB Host Port (Type B)
- External GPS (NMEA 0183 / RS232 auto baud-rate sensing)
SPECIFICATIONS
| Model | CP PRO |
|---|---|
| Display | 2.8″ IPS color TFT LCD, 320 x 240 pixels, double-sided, anti-reflection coated window |
| Internal sensors | 5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light |
| Supply Voltage | 12 – 32 V DC |
| Power Consumption | 10 W max |
| Operating Temperature | -20° to +85°C (-4° to +185°F) |
| Storage Temperature | -40° to +90°C (-40° to +194°F) |
| Waterproof Rating | IP67 / IP64 (front / back) |
| Compass Safe distance | 0.5 m (1.7 ft) |
| Compliance | CE, FCC |
| Weight | 0.22 kg (0.49 lbs) |
| Mounting | Surface, flush or gimbal bracket mount |
