SX100 Stern Thruster

Call 954-577-2850 or Send Enquiry for Pricing

side-power-logo-tm

SX100 Stern thruster- 12V  220 lbs. thrust ON/OFF External

SX100 Stern thruster- 24V  256 lbs. thrust ON/OFF External

Thank You for your interest!

Side-Power Thrusters

SX100/185T – 12V & 24V  External Stern Thruster, 100 kg (256 lbs), 185mm (7.3″) tunnel


The SX100 stern thruster is the perfect choice for boats where the inside configuration of the boat’s stern makes a standard thruster installation impractical. When fitted with the optional cowls, the stern thruster assembly is perfect for boats with twin stern drives. The special cowls enable good performance by diverting the water flow past the stern drive legs which normally blocks the waterflow and the thrust.

Features & Benefits:

  • Pre-assembled thruster unit in a rugged GRP casing for simple external installation.
  • Waterproof and ignition protected: can be installed in gasoline-powered boats.
  • Requires only small holes in the boat’s transom for power/control cables and mounting.
  • Serviceable when boat is lifted (refitted with new O-ring seal).

intelligent-power-control150twin150sealed-drive150galvanic-separation150q-prop-150ignition-protectied

Thrust @ 10.5VDC 220 lbs (100 kg)
Thrust @ 12VDC 256 lbs (116 kg)
Typical Boat Size 40-56′ (12-17 m)
Tunnel Diameter (I.D.) 7.3″ (185 mm)
Propulsion System Twin
Power @ 10.5VDC 8.4 hp (6.3 kw)
Voltage 12VDC
Minimum Battery Capacity 1425 CCA SAE
Recommended Fuse Size 500 Amps (SMANL500)
Manufacturer Side-Power
Min Depth to Top of Tunnel 5.47″ (139mm)
Min Depth to Center of Tunnel 10.90″ (277mm)
Thrust @ 21VDC 220 lbs (100 kg)
Thrust @ 24VDC 256 lbs (116 kg)
Typical Boat Size 40-56′ (12-17 m)
Tunnel Diameter (I.D.) 7.3″ (185 mm)
Propulsion System Twin
Power @ 21VDC 8.4 hp (6.3 kw)
Voltage 24VDC
Minimum Battery Capacity 760 CCA SAE
Recommended Fuse Size 325 Amps (SMANL325)
Manufacturer Side-Power
Min Depth to Top of Tunnel 5.47″ (139mm)
Min Depth to Center of Tunnel 10.90″ (277mm)