SX80 Stern Thruster

SX80 Stern Thruster

Call 954-577-2850 or Send Enquiry for Pricing

side-power-logo-tm

SX80 Stern thruster- 12V 176 lbs thrust ON/OFF External

SX80 Stern thruster- 24V 212 lbs thrust ON/OFF External

Thank You for your interest!

SKU: SX80/185T Categories: , Tags: ,

Side-Power Thrusters

The SX80 Stern Thruster is the perfect choice for boats where the inside configuration of the boats stern makes a standard thruster installation impractical. When fitted with the optional cowls, the sternthuster assembly is perfect for boats with twin stern drives. The special cowls enables good performance by diverting the water flow past the stern drive legs which normally blocks the waterflow and the thrust.

Features & Benefits:

  • Pre-assembled thruster unit in a rugged GRP casing for simple external installation.
  • Waterproof and ignition protected: can be installed in gasoline-powered boats.
  • Requires only small holes in the boat’s transom for power/control cables and mounting.
  • Serviceable when boat is lifted (refitted with new O-ring seal).

intelligent-power-control150twin150sealed-drive150galvanic-separation150q-prop-150

Thrust @ 10.5VDC 176 lbs (80 kg)
Thrust @ 12VDC 212 lbs (96 kg)
Typical Boat Size 35-48′ (10-15 m)
Tunnel Diameter (I.D.) 7.3″ (185 mm)
Propulsion System Twin
Power @ 10.5VDC 6 hp (4.4 kw)
Voltage 12VDC
Minimum Battery Capacity 1045 CCA SAE
Recommended Fuse Size 400 Amps (SMANL400)
Manufacturer Side-Power
Min Depth to Top of Tunnel 3.66″ (93mm)
Min Depth to Center of Tunnel 7.28″ (185mm)
Thrust @ 21VDC 176 lbs (80 kg)
Thrust @ 24VDC 212 lbs (96 kg)
Typical Boat Size 35-48′ (10-15 m)
Tunnel Diameter (I.D.) 7.3″ (185 mm)
Propulsion System Twin
Power @ 21VDC 6 hp (4.4 kw)
Voltage 24VDC
Minimum Battery Capacity 570 CCA SAE
Recommended Fuse Size 250 Amps (SMANL250)
Manufacturer Side-Power
Min Depth to Top of Tunnel 3.66″ (93mm)
Min Depth to Center of Tunnel 7.28″ (185mm)

Related products