SH2200 tunnel thruster hydraulic Ø730mm BA355

Call 954-577-2850 or Send Enquiry for Pricing

SH2200 is a high‑performance thruster delivering up to 2,200 kg of continuous thrust, approved for installation on DNV‑classed vessels.

Its compact design combines high efficiency with low noise and vibration, ensuring smooth and precise maneuvering. The thruster features a highly efficient twin counter‑rotating NiBrAl Q‑propeller system and a lead‑free aluminium bronze gear leg for maximum durability and corrosion resistance.

SH2200 is supplied with an external 2.5‑liter gear oil tank with oil level sensor, allowing oil changes while the vessel is in the water. An optional gear oil temperature sensor is available.

The unit is offered in versions for horizontal or vertical installation.

For optimal system integration, please contact Sleipner or an authorized distributor for project support.

Categories: ,

Product features

Properties

S-LINK™

S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.

  • Compact and waterproof plugs
  • Keyed and color-coded connectors to ensure correct and easy installation
  • Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install

Q-PROP™

The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.

  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors

PRO™

A PRO™ thruster system enables you to apply only the necessary power to complete your maneuver. The variable speed control eliminates the noise associated with standard on/off thrusters.

The system also includes a practical hold-function. In a dual system (bow and stern) a single press of a button will keep you alongside the docks – making docking truly a one-person job.

Speed controlled thrusters are the best choice for joystick interaction.​

OVERHEAT PROTECTION

When high temperatures are detected, On/off thrusters are automatically shut off to prevent overheating. PRO™ thrusters with speed control provide extended run-time by derating power to maintain temperature within safe levels.

SPLASH-PROOF

This product is manufactured for installations in environments that may experience moist or occasional splashes.

GRAVITY FEED LUBRICATION

The thruster gearleg is supplied with oil from a separate reservoir above the waterline to monitor oil levels.

FLEXIBLE COUPLING

Flexible coupling protects the product’s driveline by compensating for minor misalignments between the shafts of the thruster motor and gearleg.

AT SEA SERVICE

This product can be delivered with an optional on-water oil change capability to limit the need for dry-docking your vessel for a scheduled oil change.

TWIN COUNTER-ROTATING PROPELLERS

Two counter-rotating propellers offer the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. Our twin-counter thruster range is the favorite among leading boatbuilders in high-end yachts.

Category Specification Value
Power & Alarms Power supply Hydraulic
Alarm notification Via the product’s control device
Thrust Ratings Heavy duty thrust, nominal 2200kg / 4850lbs
Light duty thrust, nominal 2200kg / 4850lbs
Features & Physical Key Features Q-Propeller, Twin Counter Rotating Propellers, Gravity Feed Lubrication, Variable Speed Control, S-Link, Overheat Protection, Splash-Proof, Flexible Coupling, At Sea Gear Leg Oil Service
Motor description BA355
Dimensions (H) Height 720mm / 28in
(L) Length 620mm / 24in
(W) Width 902mm / 35in
(ID) Internal Diameter 730mm / 28in
(WD min.) Min. Water Depth 1100mm / 43in
(TL min.) Min. Tunnel Length 1100mm / 43in
(TL) Recommended Tunnel Length 1500mm / 59in
(T min.) Min. Tunnel Wall Thickness 12mm / 0in
(T max.) Max. Tunnel Wall Thickness 30mm / 1in
Installation Placement Horizontal
Capability (Bow / Stern / Tunnel) Yes / Yes / Yes
Hydraulics & Oil Cross over valve Yes
Oil volume (gearleg / total) 7.5L / 10L
Gear oil type Meropa EliteSyn XM 150
Port A/B / Drain port 1.1/2″ 6000 PSI SAE / M33x2
Rates Flow rates (60%/80%/100%) 334 / 385 / 431 L/min
Pressure rates (60%/80%/100%) 123 / 156 / 206 Bar
Integration & Compliance Typical vessel class Motor, Commercial, Sail
Typical vessel size 50-70m / 164-229ft
DNV type approved Yes