VETUS STERN THRUSTER EXTENSION KIT FOR SHALLOW DRAFT BOATS, D 250 MM

Call 954-577-2850 or Send Enquiry for Pricing

logo

The kit ensures that the propeller is submerged well below the waterline so that the stern thruster functions correctly. For 250 mm tunnel diameter.

Thank You for your interest!

SKU: SDKIT250 Categories: , Tag:

Vetus

For the stern thruster to function correctly, it is important that the propeller is submerged well below the waterline. If this is not the case, the propeller may suck air into the tunnel, with a considerable loss of thrust power as a consequence.
However, on some boats this is not really feasible, because the draft at the stern is too shallow and because the thruster assembly should never protrude beneath the bottom of the boat. In order to ensure both tunnel openings are sufficiently below the waterline, VETUS has developed an extension kit for stern thrusters. This kit consists of two shells made of GRP, together with all the necessary stainless steel fastenings.
The kit can be easily retrofitted to existing installations. It should be used if the transom is fitted with other equipment, which may prevent unhindered water flow through the tunnel. It is also ideal for so-called “house boats”, which in general have a very shallow draft both at the bow and at the stern.

Internal tunnel diameter (mm) 250
Size A in mm, see drawing 28
Size B in mm, see drawing 303
Size C in mm, see drawing 1066
Size D in mm, see drawing 370
Size E min. in mm, see drawing 250
Size F, diameter in mm, see drawing 185
Size X (= 1/2 F + A) in mm, see drawing 153
Manufacturer Vetus